Diagram 6/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Airbag control module, Driver thorax airbag igniter, Front passenger thorax airbag igniter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J234 - Airbag control module Locations

N199 - Driver thorax airbag igniter Locations

N200 - Front passenger thorax airbag igniter Locations

N201 - Driver side rear thorax airbag igniter Locations

N202 - Passenger side rear thorax airbag igniter Locations

T3q - 3-pin connector, in the coupling point for the left front seat Locations

T3t - 3-pin connector, in the coupling point for the right front seat Locations

T3v - 3-pin connector, in the coupling point for the left rear seat

T3w - 3-pin connector, in the coupling point for the right rear seat

T100 - 100-pin connector Locations

(43) - Ground connection on A-pillar, lower right [1][2]Ground Locations

(44) - Ground connection on A-pillar, lower left [1][2]Ground Locations

(50) - Ground connection in luggage compartment, left [1][2]Ground Locations

(51) - Ground connection in luggage compartment, right [1][2]Ground Locations

(367) - Ground connection 2 (in main wiring harness)

(368) - Ground connection 3 (in main wiring harness)

(380) - Ground connection 15 (in main wiring harness)

(382) - Ground connection 17 (in main wiring harness)

(387) - Ground connection 22 (in main wiring harness)

* - Only for vehicles with rear side airbags

Previous Diagram 6/4 (Tracks 29-42)

Next Diagram 6/6 (Tracks 57-70)