Passenger Knee Airbag Assembly Overview

Passenger Knee Airbag Assembly Overview






1 Connector

• For the front passenger knee airbag igniter (N296)

• Disconnecting, refer to => [ Open the connector lock with a small screwdriver and disconnect the connector. ] Glove Compartment, Version With Knee Airbags

2 Passenger side knee airbag

• With the front passenger knee airbag igniter (N296)

Follow all safety precautions when working on pyrotechnic components. Refer to => [ Pyrotechnic, Electrical and Mechanical Restraint System Components, Safety Precautions and Testing Procedures ] Testing and Inspection.

• Removing and Installing, refer to => [ Front Passenger Knee Airbag Igniter N296 ] Front Passenger Knee Airbag Igniter N296

3 Bolt

• Replacing

• 8 Nm

4 Glove compartment

• Removing and Installing, refer to => [ Glove Compartment, Version with Knee Airbags ] Glove Compartment, Version With Knee Airbags

5 Bolt

• Replacing

• 8 Nm

6 Supports

• For knee airbag

7 Nut

• Replacing

• 8 Nm

8 Nut

• With connection for the ground cable

• 8 Nm