Passenger Airbag Assembly Overview

Passenger Airbag Assembly Overview






1 Nut

• Quantity: 2

• Replacing

• 9 Nm

2 Connector

• For front passenger airbag release valve igniter (N491)

Replace the connector after the airbag has deployed.

3 Connector

• for the front passenger airbag igniter 1 (N131)

4 Instrument Panel

• Replace the instrument panel after an airbag has deployed. Refer to => [ Instrument Panel ] Instrument Panel.

5 Front passenger airbags with front passenger airbag igniter 1 (N131) / front passenger airbag drain valve igniter (N491)

• Country-specific: with front passenger airbag igniter 2 (N132)

• Follow all safety precautions when working on pyrotechnic components. Refer to => [ Pyrotechnic, Electrical and Mechanical Restraint System Components, Safety Precautions and Testing Procedures ] Testing and Inspection.

• Follow the allocation of the airbag unit to the instrument panel.

• Locking and activating possible with key switch

• Removing and Installing, refer to => [ Front Passenger Airbag Igniter N131/N132/N491 ] Front Passenger Airbag Igniter N131/N132/N491

6 Connector

• For countries with front passenger airbag igniter 2 (N132)

7 Nut

• Quantity: 2

• Replacing

• 9 Nm

8 Ground wire

• 9 Nm