Driver Knee Airbag Assembly Overview

Driver Knee Airbag Assembly Overview






1 Nut

• Replacing

• 8 Nm

2 Driver side knee airbag

• with the driver knee airbag igniter (N295)

Follow all safety precautions when working on pyrotechnic components. Refer to => [ Pyrotechnic, Electrical and Mechanical Restraint System Components, Safety Precautions and Testing Procedures ] Testing and Inspection.

• Removing and Installing, refer to => [ Driver Knee Airbag Igniter N295 ] Driver Knee Airbag Igniter N295

3 Nut

• Replacing

• 8 Nm

4 Connector

• For the driver knee airbag igniter (N295)

• Disconnecting and connecting => [ Open the connector lock with a small screwdriver and
disconnect the connector. ] Driver Knee Airbag Igniter N295

5 Bracket

• for the driver knee airbag

• disconnect from the driver side knee airbag => [ Driver Side Knee Airbag, Disconnecting from Bracket ] Driver Side Knee Airbag, Disconnecting From Bracket

6 Nut

• Replacing

• 8 Nm

7 Gap cover

• Clip to the bracket

8 Bolt

• Quantity: 4

• Replacing

• 9 Nm

• Tightening sequence => [ Tighten the bolt in the following
sequence: and. ] Driver Knee Airbag Igniter N295

9 Nut

• With connection for the ground cable

• 9 Nm