Garage Door Opener Control Head (E284)

Garage Door Opener Control Head (E284)

Removing






- Remove the front interior lamp/reading lamp: without an eyeglass compartment, refer to => [ Interior Lamp/Reading Lamp, Without Eyeglass Compartment ] Interior Lamp/Reading Lamp, Without Eyeglass Compartment, with an eyeglass compartment, refer to => [ Interior Lamp/Reading Lamp, With Eyeglass Compartment ] Interior Lamp/Reading Lamp, With Eyeglass Compartment.

- Remove the Anti-theft alarm system sensor (G578) , if equipped. Refer to => [ Anti-Theft Alarm System Sensor (G578) ] Anti-Theft Alarm System Sensor (G578).

- Carefully push the clips to the side - arrows A -.

- Remove the controls - 1 - from the front interior lamp/reading lamp - 2 - - arrow B -.

Installing

Install in reverse order of removal. Note the following:

- Install the Anti-theft alarm system sensor (G578). Refer to => [ Anti-Theft Alarm System Sensor (G578) ] Anti-Theft Alarm System Sensor (G578).

- Install the front interior lamp/reading lamp: without an eyeglass compartment, refer to => [ Interior Lamp/Reading Lamp, Without Eyeglass Compartment ] Interior Lamp/Reading Lamp, Without Eyeglass Compartment, with an eyeglass compartment, refer to => [ Interior Lamp/Reading Lamp, With Eyeglass Compartment ] Interior Lamp/Reading Lamp, With Eyeglass Compartment.