Unit With Start/Stop Mode Button, Parking Aid Button, Front Passenger Airbag-Disabled-Indicator Lamp, Rear Spoiler Adjustment

Switch Unit with Start/Stop Mode Button, Parking Aid Button, Front Passenger Airbag -Disabled- Indicator Lamp, Rear Spoiler Adjustment Switch and ASR/ESP Button

Special tools, testers and auxiliary items required

• Radio Removal Tool (T10057)

Removing






- Remove Information electronics control module 1 (J794) trim.

- Install the radio removal tool (T10057) into the opening on the left and right side as illustrated and pry off the cover - 1 - for the Front passenger airbag disabled indicator lamp (K145) - arrow -,

- Releases the tabs - arrows - and remove the switch unit - 2 - from the trim - 1 - on information electronics control module 1 toward the rear.






Installing

Install in reverse order of removal. Note the following:

- Install the switch until it clicks into place.

- Install the Front passenger airbag disabled indicator lamp (K145) cover.

- Install the trim for Information electronics control module 1 (J794).