Center Speaker Trim

Center Speaker Trim

Special tools, testers and auxiliary items required

• Wedges (T10383)

Removing






• Proceed very carefully when removing and installing because it is relatively easy to damage the speaker trim.

- Carefully detach the speaker trim - 1 - from the rear pins in the direction of travel using a wedge (T10383/1) - arrows -.

- Fold the speaker trim upward and remove it toward the rear.

Installation

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Instrument Panel Assembly Overview ] Instrument Panel Assembly Overview.