Cabin Ventilation Grille: Service and Repair

Passenger Compartment Forced Air Extraction

Removal






- Remove the rear bumper cover.

- Open the lid of the luggage compartment side trim.

- Remove the upper cover - 1 - from the vent frame - 2 -.

- Release the cover on the side - arrow - and remove.

- Release the retaining clips - arrows - and push the vent frame - 1 - of the forced air extractor outward.






Installation






Installation is done is reverse order, observe the following:

- Check the seal - 1 - for damage.

- The vent frame - 2 - can only be installed in one position to ensure that the sealing lips - 3 - close correctly.

• The large radius - arrow - is at the top.

- When installing, press the vent frames into the opening on the body until all retaining tabs engage securely.

- Reinstall the cover on the vent frame.

- Install the rear bumper cover.