Defroster Vent Air Guide, Vent For Indirect Ventilation For Windshield

Defroster Vent Air Guide, Vent for Indirect Ventilation for Windshield

Removal






- Remove the instrument panel.

- Remove the air guide - 2 - in an upward direction.

- Expose the wiring harness - 1 -.

Installation

Installation is done in reverse order, observe the following:

- Replace damaged or defective foam seals - 3 -.

• The foam seal on the air guide must not be crushed when inserting the instrument panel. Otherwise, the air guide to the windshield or for indirect ventilation will be irregular or insufficient.

• After installation of the instrument panel, the direction and distribution of the air flow to the windshield coming out of the defroster vent and indirect ventilation.

- Install the instrument panel.