Oil Pump: Service and Repair

Oil Pump

Removing

- Remove the lower oil pan section. Refer to => [ Lower Oil Pan ] Lower Oil Pan.

- Remove the bolts - arrows -.






- Remove the oil pump forward from the input shaft.

Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to => [ Oil Pan Upper and Lower Sections, Oil Pump and Oil Cooler Overview ] Service and Repair.

• Replace the seal and O-ring.

- Install oil pump onto the driveshaft and fasten.

- Install oil pan lower section. Refer to => [ Lower Oil Pan ] Lower Oil Pan.

- Fill engine oil and check oil level.