Diagram 1/47 (Tracks 631-644)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Data bus on board diagnostic interface, Comfort system CAN bus high wire junction





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J533 - Data bus on board diagnostic interface Locations

T17o - 17-pin connector, in the connector station, right A-pillar Locations

T32b - 32-pin connector Locations

T46a - 46-pin connector Locations

T46b - 46-pin connector

TV34 - Comfort system CAN bus high wire junction

TV36 - Instrument cluster CAN bus high wire junction

TV38 - Comfort system CAN bus low wire junction

TV40 - Instrument cluster CAN bus low wire junction

(A204) - Instrument cluster CAN bus high connection (in instrument panel wiring harness)

(A205) - Instrument cluster CAN bus low connection (in instrument panel wiring harness)

(B708) - Instrument cluster CAN bus high connection 1 (in main wiring harness)

(B709) - Instrument cluster CAN bus low connection 1 (in main wiring harness)

Previous Diagram 1/46 (Tracks 617-630)