Diagram 36/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Information electronics control module 1





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument cluster control module

J533 - Data bus on board diagnostic interface Locations

J794 - Information electronics control module 1, in the center console Locations

ST1 - Fuse panel 1

SC4 - Fuse 4 (on fuse panel C) Overview Of Fuses

T2aw - Double connector

T8g - 8-pin connector

T8h - 8-pin connector

T17o - 17-pin connector, in the connector station, right A-pillar Locations

T32 - 32-pin connector

T32b - 32-pin connector Locations

(372) - Ground connection 7 (in main wiring harness)

(687) - Ground connection 1 on center tunnel [1][2]Ground Locations

(B159) - Diagnostic connection (in interior wiring harness)

(B318) - Positive connection 4 (30a) (in main wiring harness)

(B444) - OBD connection 1 (in main wiring harness)

* - Refer to applicable wiring diagram for fuse positions

*2 - Refer to applicable wiring diagram for data bus networking

*3 - Fiber optic cable

Next Diagram 36/3 (Tracks 15-28)