Brake Pad Wear Display Wire

Brake Pad Wear Display Wire

Removing

- Raise the vehicle.

- Remove wheels.

- Disconnect the connector for the brake pad wear display - arrow -.






- Release the connector from the mount while turning it 90° at the same time.






- Remove the connector from the bracket.

- Remove the brake pad wear display contact form the clip inside the inner brake pad.

- Remove the clip from the inner brake pad.

Installing

- Install the clip for the brake pad wear display into the inner brake pad.

- Install the contact in the clip - direction of arrow -.






• Make sure the contact for the brake pad wear display fits correctly in the clip inside the inner brake pad.

- Connect wear indicator connector.

- Install the electrical connection for the brake pad wear display in the bracket.

- Install wheels.

- Lower vehicle.