Fresh Air Intake Grille

Fresh Air Intake Grille

Depending on the version, for some countries with high dust levels, a dust filter, which prevents dust and sand from entering the fresh air blower, is installed instead of the fresh air intake grille. Allocation, refer to Electronic Parts Catalog (ETKA).

Removal






- Remove the plenum chamber cover.

- Release the retaining tabs - 4, 5 -.

- Tilt the fresh air intake grille - 2 - in the - direction of the arrow - and detach from the intake duct - 1 -.

- Disconnect the electrical connector - 3 -.

- Remove the fresh air intake grille.

Installation

Installation is done in reverse order, observe the following:

- Install the plenum chamber cover.