Bumper Cover Mount Counterholder

Bumper Cover Mount Counterholder

Special tools, testers and auxiliary items required

• Drill

• 4 mm drill bit

Removing






- Remove the front bumper cover. Refer to => [ Front Bumper Cover ] Front Bumper Cover.

- Remove the bolt - 1 -.

- Drill off the rivet heads - arrows -, strike the rivet shafts and remove the counterholder - 2 -.

Installation

• For the correct tightening specifications, refer to => [ Lock Carrier with Attachments Assembly Overview ] Lock Carrier With Attachments Assembly Overview.

Installation is reverse of removal, but note the following:

- Install the front bumper cover. Refer to => [ Front Bumper Cover ] Front Bumper Cover.