Bumper Cover Mount

Bumper Cover Mount

Removing






- Remove the front bumper cover. Refer to => [ Front Bumper Cover ] Front Bumper Cover.

- Remove the headlamp housing.

- Right side: remove the air filter housing.

- Remove the bolts - 2 through 5 -.

- Remove mount - 1 -.

- If the mount - 1 - is being replaced, loosen the bolts - 2 and 3 - and remove the headlamp housing mount - 4 -.






Installation

• For the correct tightening specifications refer to => [ Lock Carrier with Attachments Assembly Overview ] Lock Carrier With Attachments Assembly Overview.

Installation is reverse of removal, but note the following:

- Install the air filter housing.

- Install the headlamp housing.

- Install the front bumper cover. Refer to => [ Front Bumper Cover ] Front Bumper Cover.