Rear Bench Backrest Heating Elements Z11/Z13, Standard Seat/Sport Seat/Super Sport Seat

Rear Bench Backrest Heating Elements Z11/Z13, Standard Seat/Sport Seat/Super Sport Seat

Left rear backrest heating element (Z11) / right backrest heating element (Z13)

Removing






- Separate the backrest cover and backrest cushion. Refer to => [ Backrest Cover and Backrest Cushion for Rear Seat Backrest ] Backrest Cover and Backrest Cushion For Rear Seat Backrest.

- Cut the electric wire - 1 - directly from the old heating element - 3 -.

• The old seat heating element remains on the backrest cushion - 2 - and the new seat heating element is bonded over it.

Installation

- Align the new heating element on the backrest cushion.

- Peel the protective film off the heating element. Be careful not to damage the heating element.

- Glue the heating element so that they align with the old heating element and free of wrinkles.

Further installation is performed in the reverse order of removal.

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Seat Heater and Backrest Heater for Rear Seat Bench Assembly Overview ] Seat Heater and Backrest Heater For Rear Seat Bench Assembly Overview.