Rear Headrest Guide

Rear Headrest Guide

Removing






- Remove the rear headrest:

• Standard seat/Sport seat, refer to => [ Rear Headrest, Standard Seat/Sport Seat ] Rear Headrest, Standard Seat/Sport Seat.

• Super sport seat, refer to => [ Rear Headrest, Super Sport Seat ] Rear Headrest, Super Sport Seat.

- Loosen the backrest cover with backrest cushion from the rear seat backrest frame. Refer to => [ Backrest Cover with Rear Seat Backrest Cushion ] Backrest Cover With Rear Seat Backrest Cushion.

- Move the backrest cover with the backrest cushion - 1 - as far up as possible until the headrest pipe - 2 - welded in the rear seat backrest frame - 3 - and the headrest guide - 4 - is visible.

- Push the tab - arrow A - down and at the same time pull the headrest guide out of the rear seat backrest.

• Ignore - arrow B -.

Installation

Install in reverse order of removal. Note the following:

• The headrest guide can only be installed in one position on one side of the backrest.

• Guide lug of headrest guide must engage in the cut-out of the mount on the headrest frame.

- Push the headrest guide in until the tab lock into the rear seat backrest - arrow B -.

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Rear Headrest Assembly Overview ] Rear Headrest Assembly Overview.