Torsion Bar Bearing

Torsion Bar Bearing

Removing

The torsion bar exerts considerable spring force. Be absolutely sure to comply with the bullet points below to avoid injury:

• Always remove and install the torsion bar in the sequence described and only using the tools specified.

• Never use pliers and other levers.

• Do not stand directly in front of the torsion bar when removing and installing it. Stand off to the side.

- Remove torsion bar. Refer to => [ Torsion Bar ] Torsion Bar.

- Pry out bearing - 2 - from the guide on the seat pan using a flat-head screwdriver - 1 - - arrow -.






Installation

Install in reverse order of removal. Note the following:

The torsion bar exerts considerable spring force. Be absolutely sure to comply with the bullet points below to avoid injury:

• Always remove and install the torsion bar in the sequence described and only using the tools specified.

• Never use pliers and other levers.

• Do not stand directly in front of the torsion bar when removing and installing it. Stand off to the side.

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Torsion Bar Assembly Overview ] Torsion Bar Assembly Overview.