Seat Rail Spindle Cover

Seat Rail Spindle Cover

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

Removing






- Push the headrest into the lowest position.

Front spindle cover:

- Move the front seat all the way to the rear and then into its highest position.

- Pry off spindle cover - 1 - from the seat rail cover using the trim removal wedge (3409) - 2 - and the forward/back adjustment spindle.

Rear spindle cover:






- Move the front seat all the way forward/up.

- Pry the spindle cover - 1 - off the seat rail cover and the seat rail bolt using the trim removal wedge (3409) - 2 -.

Installation

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Standard Seat/Sport Seat Assembly Overview ] Standard Seat/Sport Seat Assembly Overview.