Release Cable Mount Lever and Seat Forward/Back Adjustment Spring

Release Cable Mount Lever and Seat Forward/Back Adjustment Spring

Removing

- Push the headrest into the lowest position.

- Move the front seat all the way to the rear and then into its highest position.

- Disengage the release cable bracket - 1 - from the seat forward/back adjustment - 2 -.






- Disengage the end of the release cable - arrow - at release cable retainer lever - 3 - of the seat forward/back adjuster.

- Turn the release cable retainer lever forward and remove it.

- Remove the spring if necessary.

Installation

Installation is performed in reverse order of removal, noting the following:

• The release cable retainer lever is the same for the driver and front passenger seat. The spring is different for the driver and front passenger seat.

Release cable retainer with installed spring for the left seat:






- Attach the spring at points - 1 - and - 2 -.

- Turn the spring - 3 - clockwise.

- Place the spring around tab - 4 - so that it is touching - 5 -.

Release cable retainer with installed spring for the right seat:






- Attach the spring at points - 1 - and - 2 -.

- Turn the spring - 3 - counter-clockwise.

- Place the spring around tab - 4 - so that it is touching - 5 -.

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Seat Forward/Back Adjuster Assembly Overview ] Seat Forward/Back Adjuster Assembly Overview.