Backrest Adjustment Hand Wheel

Backrest Adjustment Hand Wheel

Special tools, testers and auxiliary items required

• Assembly tool (3399)

Removing






- Move the front seat all the way forward/up.

- Turn the backrest adjustment wheel - 1 - until one catch is visible from behind - arrow A -. Use a flashlight if necessary.

- Attach the assembly tool (3399) to the catch and pry off the hand wheel - arrow B -.

- Turn the backrest adjustment wheel 120° further and repeat the process.

- Remove the backrest adjustment handwheel.

Installation

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Sill and Tunnel Side Trim Assembly Overview ] Sill and Tunnel Side Trim Assembly Overview.