Backrest Heating Elements Z7/Z9, Standard Seat/Sport Seat, Manual or Power

Backrest Heating Elements Z7/Z9, Standard Seat/Sport Seat, Manual or Power

Driver backrest heating element (Z7) / front passenger backrest heating element (Z9)

Removing






- Separate the backrest cover and backrest cushion. Refer to => [ Backrest Cover and Backrest Cushion, Separating and Assembling, Standard Seat/Sport Seat ] Backrest Cover and Backrest Cushion, Separating and Assembling, Standard Seat/Sport Seat.

- Cut the electric wire - 3 - directly from the old heating element - 2 -.

• The old seat heating element remains on the backrest cushion - 1 - and the new seat heating element is bonded over it.

Installation

- Align the new heating element on the backrest cushion.

- Peel the protective film off the heating element. Be careful not to damage the heating element.

- Glue the heating element so that they align with the old heating element and free of wrinkles.

Further installation is performed in the reverse order of removal.

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Seat Heating and Backrest Heating Assembly Overview, Standard Seat/Sport Seat ] Seat Heating and Backrest Heating Assembly Overview, Standard Seat/Sport Seat.