Backrest Cover and Backrest Cushion For Rear Seat Backrest Assembly Overview
Backrest Cover and Backrest Cushion for Rear Seat Backrest Assembly Overview
• A right 2/3 rear seat backrest is shown in the assembly overview. The left 1/3 rear seat backrest is identical.
• The 2-seat rear seat backrest is shown in the illustration.
Standard Seat/Sport Seat, Version with Pass-Through
Super Sport Seat
Standard Seat/Sport Seat, Version without Pass-Through
1 Backrest cover
• Backrest Cover and Cushion, Removing and Installing, refer to => [ Backrest Cover with Rear Seat Backrest Cushion ] Backrest Cover With Rear Seat Backrest Cushion
• Backrest Cover and Cushion, Separating and Assembling, refer to => [ Backrest Cover and Backrest Cushion for Rear Seat Backrest ] Backrest Cover and Backrest Cushion For Rear Seat Backrest
• For the correct allocation, refer to => Parts Catalog
• Make sure there are no folds after installing
2 Cushion clip
• For attachment of backrest cover to backrest cushion
• Replacing
• Install at the same location with upholstery clip pliers (V.A.G 1634)
3 Wire
• Embedded in the foam of the backrest cushion
• For attachment of backrest cover to backrest cushion
4 Contour wire
• Pushed into the pocket of the backrest cover
• For attachment of backrest cover to backrest cushion
5 Backrest frame
• Removing and Installing, refer to => [ Backrest Cover with Rear Seat Backrest Cushion ] Backrest Cover With Rear Seat Backrest Cushion
6 Upper center cushion
• Removing and Installing, refer to => [ Backrest Cover with Rear Seat Backrest Cushion ] Backrest Cover With Rear Seat Backrest Cushion
7 Backrest padding
• Backrest Cover and Cushion, Removing and Installing, refer to => [ Backrest Cover with Rear Seat Backrest Cushion ] Backrest Cover With Rear Seat Backrest Cushion
• Backrest Cover and Cushion, Separating and Assembling, refer to => [ Backrest Cover and Backrest Cushion for Rear Seat Backrest ] Backrest Cover and Backrest Cushion For Rear Seat Backrest
• For the correct allocation, refer to => Parts Catalog
8 Molding
• Sewn into backrest cover
• For attaching the backrest cover on the backrest frame
• Make sure it fits correctly inside the backrest frame
9 Lower center cushion
• Removing and Installing, refer to => [ Backrest Cover with Rear Seat Backrest Cushion ] Backrest Cover With Rear Seat Backrest Cushion
Standard Seat/Sport Seat, Version with Pass-Through
1 Lower center cushion
• Removing and Installing, refer to => [ Lower Center Cushion ] Lower Center Cushion
• Engage the cushion to the pass-through door and press on it until it clicks into place
2 Backrest cover
• Backrest Cover and Cushion, Removing and Installing, refer to => [ Backrest Cover with Rear Seat Backrest Cushion ] Backrest Cover With Rear Seat Backrest Cushion
• Backrest Cover and Cushion, Separating and Assembling, refer to => [ Backrest Cover and Backrest Cushion for Rear Seat Backrest ] Backrest Cover and Backrest Cushion For Rear Seat Backrest
• For the correct allocation, refer to => Parts Catalog
• Make sure there are no folds after installing
3 Cushion clip
• For attachment of backrest cover to backrest cushion
• Replacing
• Install at the same location with upholstery clip pliers (V.A.G 1634)
4 Wire
• Embedded in the foam of the backrest cushion
• For attachment of backrest cover to backrest cushion
5 Contour wire
• Pushed into the pocket of the backrest cover
• For attachment of backrest cover to backrest cushion
6 Backrest frame
• Removing and Installing, refer to => [ Backrest Cover with Rear Seat Backrest Cushion ] Backrest Cover With Rear Seat Backrest Cushion
7 Upper center cushion
• Removing and Installing, refer to => [ Backrest Cover with Rear Seat Backrest Cushion ] Backrest Cover With Rear Seat Backrest Cushion
8 Backrest padding
• Backrest Cover and Cushion, Removing and Installing, refer to => [ Backrest Cover with Rear Seat Backrest Cushion ] Backrest Cover With Rear Seat Backrest Cushion
• Backrest Cover and Cushion, Separating and Assembling, refer to => [ Backrest Cover and Backrest Cushion for Rear Seat Backrest ] Backrest Cover and Backrest Cushion For Rear Seat Backrest
• For the correct allocation, refer to Parts Catalog
9 Retaining strip
• Sewn into backrest cover
• For attaching the backrest cover on the backrest frame
Super Sport Seat
1 Lower center cushion
• Removing and Installing, refer to => [ Lower Center Cushion ] Lower Center Cushion
• Engage the cushion to the pass-through door and press on it until it clicks into place
2 Backrest cover
• Backrest Cover and Cushion, Removing and Installing, refer to => [ Backrest Cover with Rear Seat Backrest Cushion ] Backrest Cover With Rear Seat Backrest Cushion
• Backrest Cover and Cushion, Separating and Assembling, refer to => [ Backrest Cover and Backrest Cushion for Rear Seat Backrest ] Backrest Cover and Backrest Cushion For Rear Seat Backrest
• For the correct allocation, refer to Parts Catalog
• Make sure there are no folds after installing
3 Cushion clip
• for attachment of backrest cover to backrest cushion
• Replacing
• Install at the same location with upholstery clip pliers (V.A.G 1634)
4 Wire
• Embedded in the foam of the backrest cushion
• For attachment of backrest cover to backrest cushion
5 Contour wire
• Pushed into the pocket of the backrest cover
• For attachment of backrest cover to backrest cushion
6 Backrest frame
• Removing and Installing, refer to => [ Backrest Cover with Rear Seat Backrest Cushion ] Backrest Cover With Rear Seat Backrest Cushion
7 Upper center cushion
• Removing and Installing, refer to => [ Backrest Cover with Rear Seat Backrest Cushion ] Backrest Cover With Rear Seat Backrest Cushion
8 Backrest padding
• Backrest Cover and Cushion, Removing and Installing, refer to => [ Backrest Cover with Rear Seat Backrest Cushion ] Backrest Cover With Rear Seat Backrest Cushion
• Backrest Cover and Cushion, Separating and Assembling, refer to => [ Backrest Cover and Backrest Cushion for Rear Seat Backrest ] Backrest Cover and Backrest Cushion For Rear Seat Backrest
• For the correct allocation, refer to Parts Catalog
9 Retaining strip
• Sewn into backrest cover
• For attaching the backrest cover on the backrest frame