Front Sill Panel Trim Assembly Overview

Front Sill Panel Trim Assembly Overview






1 Clips

• Quantity: 4

• Install in the trim

• Remove clips left in the mounting points of the body and use for installation in the trim

• Replace damaged or deformed clips

2 Clips

• Install into the gap cover

• Remove clips left in the mounting points of the body and use for installation in the trim

• Replace any damaged or deformed clips

3 A-pillar gap cover

• Engage into the upper A-pillar trim

• Removing and Installing, refer to => [ A-Pillar Gap Cover ] A-Pillar Gap Cover

4 Bolt

• Driver side only

• 2.5 Nm

5 Hood release lever

• Hood release cable

• Driver side only

• Removing and Installing, refer to => [ Hood Release Cable Operating Lever ] Hood Release Cable Operating Lever

6 Front sill panel trim

• Removing and Installing, refer to => [ Front Sill Panel Trim ] Front Sill Panel Trim