Center Console With Attachments Assembly Overview

Center Console with Attachments Assembly Overview






1 Bolt

• Quantity: 2

• 1.4 Nm

2 Cup holder

• Removing and Installing, refer to => [ Cupholder ] Cupholder

3 Trim

• for the cupholder

• Removing and Installing, refer to => [ Cupholder Trim ] Cupholder Trim

• Attach trim to the cover and press on it until it audibly engages

4 Side trim

• For the center console

• If equipped

• Removing and Installing, refer to => [ Center Console Side Trim ] Center Console Side Trim

• Replace any damaged or deformed clips

• Press the side trim panel back on until it audibly latches.

5 Trim panel

• For the center console

• If equipped

• Removing and Installing, refer to => [ Center Console Trim Panel ] Center Console Trim Panel

6 Side trim

• For the center console

• If equipped

• Removing and Installing, refer to => [ Center Console Side Trim ] Center Console Side Trim

• Replace any damaged or deformed clips

• Press the side trim panel back on until it audibly latches.

7 Bolt

• Quantity: 8

• 1.4 Nm

• Tightening sequence => [ Tighten the bolts in a sequence. ] Center Console Trim Panel

8 Center Console

• Removing and Installing, refer to => [ Center Console ] Center Console

9 Bolt

• Quantity: 2

• 3 Nm

10 Bolt

• Quantity: 2

• 3 Nm

11 Rear bracket

• For the center console

• Removing and Installing, refer to => [ Center Console Rear Bracket ] Center Console Rear Bracket

12 Storage compartment

• If equipped

• Removing and Installing, refer to => [ Center Console Storage Compartment ] Center Console Storage Compartment

13 Bolt

• For the correct tightening specifications, refer to => [ (Item 1) Bolt ] Storage Compartment With Attachments Assembly Overview