B-Pillar Trim

B-pillar Trim

Removing






- Open the front and rear doors.

- Unclip the cover - 1 - and remove it downward - arrow -.

- Remove the bolts - 2 and 3 -.

- Push the B-pillar trim - 2 - downward - arrow -. While doing this, the upper tab will disengage from the mount - 3 -.






- Remove B-pillar trim from the door seals - 1 and 4 -.

Installing






• For the correct tightening specifications refer to => [ Roof Trim Molding Assembly Overview, B-Pillar Trim ] Roof Trim Molding Assembly Overview, B-Pillar Trim.

Installation is reverse of removal, but note the following:

- Mount the B-pillar trim - 1 - on the B-pillar and push it upward. The guide - 2 - must fit into the mount - 3 -.

• The B-pillar trim will lock into the opening - arrow - in the left - 5 - and right - 4 - door seal when it is pushed upward.

- Press on the B-pillar trim.