Infrared Camera Mount

Infrared Camera Mount

Removing






- Remove the lock carrier cover. Refer to => [ Lock Carrier Cover ] Lock Carrier Cover.

- Disconnect electrical harness connector - 1 -.

- Remove the screws - 2, 3, 5 and 6 - and then remove the mount - 4 - with the infrared camera (R212).

- Open the clamp - arrow - and remove the windshield washer fluid hose - 7 -.

- If the mount is being replaced, then remove the infrared camera (R212).

Installing

• Tightening specifications, refer to => [ Bumper Cover Assembly Overview ] Bumper Cover Assembly Overview.

Installation is reverse of removal, but note the following:

- Install the infrared camera (R212).

- Install the lock carrier cover. Refer to => [ Lock Carrier Cover ] Lock Carrier Cover.