Headlamp Cover

Headlamp Cover

Removing






- Pull the headlamp cover - 1 - forward - arrows -. While doing this, the tabs - 2 and 3 - will detach.

Installing






Installation is reverse of removal, but note the following:

- Mount the cover - 3 - on the headlamp and on the lock carrier cover - 1 -.

• The mounts - 2 and 7 - must fit into the guides on the lock carrier cover and body - 8 -.

• The sealing lip - 4 - may not slide under the fender - 5 -. If necessary, push the seal - 6 - behind the fender.

- Push the cover until it until it clicks into place.