Fuse Panel D, With Right Instrument Panel Fuse Panel

Fuse Panel D, with Right Instrument Panel Fuse Panel

Removing






- Turn off the ignition and remove the ignition key.

- Remove the glove compartment.

- Remove the interior CAN cut-off connector (T46i) mount - item 4 -. Refer to => [ Instrument Panel CAN Cut-Off Connector Mount ] Instrument Panel CAN Cut-Off Connector Mount.

- Release retaining clips - 1 - in the - direction of the arrow - and press the fuse panels - 2 - and - 3 - back and out of the fuse panel D.

- Open the clips - arrow A - and remove fuse panel D - 2 - in - direction of arrow B - on the central tube - 1 - for the instrument panel.






Installing

Install in reverse order of removal, observing the following:

- Install the interior CAN cut-off connector mount. Refer to => [ Instrument Panel CAN Cut-Off Connector Mount ] Instrument Panel CAN Cut-Off Connector Mount.

- Install the glove compartment.