FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Instrument Cluster and Radio Frequency Controlled Clock Receiver Overview






Instrument Cluster and Radio Frequency Controlled Clock Receiver Overview

Observe the notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

All warning lamps in instrument cluster are fitted with Light Emitting Diodes (LEDs). Instrument cluster must be replaced in the event of warning lamp failure.






1 Oil Level Thermal Sensor (G266)

2 Oil Pressure Switch (F1)

3 Electrical Connector

For the data bus on board diagnostic interface.

4 Data Bus On Board Diagnostic Interface (J533)

Overview, refer to => [ Data Bus On Board Diagnostic Interface Overview ] Data Bus On Board Diagnostic Interface Overview.

5 Bolt

Tightening specification, refer to => [ Data Bus On Board Diagnostic Interface Overview ] Data Bus On Board Diagnostic Interface Overview.

6 Fiber Optic Cable Connector

Attach using the protective cap for cable connector (VAS 6223/9).

7 Instrument Cluster

With the instrument cluster control module (J285).

Removing and installing, refer to => [ Instrument Cluster with Instrument Cluster Control Module (J285) ] Service and Repair.

Multi-pin connector pin assignment, refer to => [ Instrument Cluster Multi-Pin Connector Pin Assignment ] [1][2]Diagrams.

8 Electrical Connector

For the instrument cluster.

9 Bolt

2.5 Nm

10 Gap Cover

Removing and installing.

11 Bolt

2.5 Nm

12 Bolt

2.5 Nm

13 Fuel Level Sensor (G)

Multi-pin connector assignment, refer to => [ Fuel Level Sensor, Connector Assignment ] Fuel Level Sensor, Connector Assignment.

14 Fuel Level Sensor 2 (G169)

Multi-pin connector assignment, refer to => [ Fuel Level Sensor 2, Connector Assignment ] Fuel Level Sensor 2, Connector Assignment.

15 Radio Frequency Controlled Clock Receiver (J489)

Removing and installing, refer to => [ Radio Frequency Controlled Clock Receiver (J489) ] Radio Frequency Controlled Clock Receiver (J489).

16 Bolt

2.5 Nm

17 Bolt

2.5 Nm

18 Electrical Connector

For the radio frequency controlled clock receiver.

19 Windshield Washer Fluid Level Sensor (G33)

Removing and installing, refer to => [ Washer Fluid Level Sensor (G33) ] Washer Fluid Level Sensor (G33).

20 Brake Pad Wear Sensor

Left front

21 Brake Fluid Level Warning Switch (F34)

22 Engine Coolant Level (ECL) Warning Switch (F66)

23 Electrical Connector

For the outside air temperature sensor.

24 Outside Air Temperature Sensor (G17)

Removing and installing:.

Vehicles through MY 2012, refer to => [ Outside Air Temperature Sensor (G17), through MY 2012 ] Outside Air Temperature Sensor (G17), Through MY 2012