Engine Oil Cooler

Engine Oil Cooler

Special tools, testers and auxiliary items required

• Drip Tray for VAS 6100 (VAS 6208)

Removing

Risk of scalding due to hot steam and hot coolant.

• The coolant system is under pressure when the engine is warm.

• Reduce pressure by covering coolant reservoir cap with a cloth and carefully open.

- Drain the coolant. Refer to => [ Coolant, Draining and Filling ] Service and Repair.

- Remove the accessory assembly bracket. Refer to => [ Auxiliary Components Bracket ] Service and Repair.

- Remove the bolts - 4 and 5 - and remove the engine oil cooler - 3 - together with the seal - 2 -.






Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to => [ Oil Filter, Oil Cooler and Oil Pressure Switch Overview ] Oil Filter, Oil Cooler and Oil Pressure Switch Overview.

• Always replace gaskets and seals.

• Secure all hose connections with hose clamps of the same type as those equipped by the factory. Refer to the Parts Catalog

- Install the engine oil cooler - 3 - with a new seal - 2 -.






- Install the accessory assembly bracket. Refer to => [ Auxiliary Components Bracket ] Service and Repair.

- Fill with coolant. Refer to => [ Filling ] Service and Repair.

- Fill the engine oil and check the level.