Diagram 65/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Data bus on board diagnostic interface, Directional stabilization assistance control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J533 - Data bus on board diagnostic interface Overview of Control Modules in Interior of Vehicle

J759 - Directional stabilization assistance control module Locations Headlamp Assistant, Humidity Sensor and Lane Assist Overview

J769 - Lane change assistance control module Overview of Control Modules in Rear part of vehicle - Sedan (4-door models) Lane Change Assist Assembly Overview

ST1 - Fuse panel 1

SC4 - Fuse 4 (on fuse panel C) Overview Of Fuses

T10f - 10-pin connector

T12f - 12-pin connector, near the glove compartment

T12h - 12-pin connector

T17c - 17-pin connector, black Overview Of Connector Stations

T17f - 17-pin connector, brown Overview Of Connector Stations

T20d - 20-pin connector Locations

(B108) - CAN bus extended high connection 1 (in main wiring harness)

(B109) - CAN bus extended low connection 1 (in main wiring harness)

(B665) - CAN bus extended high connection 1 (in instrument panel wiring harness)

(B666) - CAN bus extended low connection 1 (in instrument panel wiring harness)

(B668) - CAN bus extended high connection 2 (in main wiring harness)

(B669) - CAN bus extended low connection 2 (in main wiring harness)

* - Refer to applicable lane assist wiring diagram

*2 - Only for vehicles with lane assist

*3 - Refer to applicable wiring diagram for fuse positions

Next Diagram 65/3 (Tracks 15-28)