Lock Trim, With Lock Cylinder

Lock Trim, with Lock Cylinder

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

Removing






- Release the backrest.

- Make sure the button - 2 - is in the "top" position.

- Using the (3409) push on the retaining tabs on both sides of the trim, in the direction of the - arrows -.

- Pull the trim - 1 - off the backrest - 3 -.

Installing

Install in reverse order of removal. Note the following:

- Make sure the button - 2 - moves easily after installing the trim.

- When installing the trim - 1 -, make sure the lock cylinder installation position is correct. Lock Cylinder.