Front Backrest Overview

Front Backrest Overview

• The assembly overview is based on a standard front seat. The front backrest on other versions is similar.






1 Seat Pan

2 Screws

• Self-locking

• Always replace if removed

• Threaded holes for screws must be cleaned, for example, with thread cutter

• 33 Nm

3 Backrest

• Removing and installing, refer to => [ Backrest Front ] Backrest Front

4 Headrest

• Manual Headrests, removing and installing, refer to => [ Headrests with Locking Mechanism ] Headrests With Locking Mechanism

• Power Headrests, removing and installing, refer to => [ Power Headrests ] Power Headrests

5 Wiring Harness

• Running from the side airbag to the connector station.

• Depending on optional equipment, there may be more wiring harnesses, such as for seat heating, lumbar support, etc.

6 Screws

• Self-locking

• Replace

• 33 Nm

Tightening specification, retaining plate for the DVD player





- Tighten the retaining plate screws - 2 - to 6 Nm.

Tightening specification, DVD socket





- Tighten nut - 2 - to 0.4 Nm.