Roof Grab Handle

Roof Grab Handle

Special tools, testers and auxiliary items required

• Long Reach Special Wrench For Slotted Bolts (VAS 6543)

Removing






Unclip the expanding caps - 1 - and - 3 - but only up to their lock position (do not pull them out all the way otherwise the silicone brake and spring and fall out and then the handle has to be replaced).

- Unclip the expanding caps - 1 - and - 3 - to the locking position using offset screwdriver for slotted screws (VAS 6543) - 2 -.

- Remove the roof grab handle - 4 - from the body opening.

Installing

- Insert the grab handle in the body cut-out.

- Press the roof grab handle expanding caps on until they engage completely.