Center Console Trim Panel

Center Console Trim Panel

Removing






- Remove center console. Refer to => [ Center Console ] Center Console.

- Remove the bolts - 1 through 8 - and the center console trim panel - 9 -.

Installing






Install in reverse order of removal. Note the following:

- Attach the 45 X 8 mm (1.77 X 0.31 in) felt strip on both sides - 2 - with the distance - a - to the edge of the decorative panel - 1 - for the center console.

• Dimension - a - = 7 mm (0.27 in).

- Tighten the bolts in a - 1 to 8 - sequence.






Tightening specifications, refer to => [ Center Console Overview ] Center Console Overview.