Center Console Rear Trim

Center Console Rear Trim

Removing






- Vehicles with a storage compartment: remove the rear storage compartment inside the center console. Refer to => [ Center Console Rear Storage Compartment ] Center Console Rear Storage Compartment.

- Vehicles with vents: remove the rear vent. Refer to => [ Rear Vents ] Rear Vents.

- Remove the screw - 2 -.

- Carefully unclip the trim - 3 - using a small screwdriver beginning at the bottom - arrows -.

- Tilt the trim upward while releasing the retaining tab - 1 - and removing from the center console.

- Disconnect the electrical connectors, if applicable.

- Vehicles with converter with socket, 12 V-230 V (U13) : release the tabs - arrows 1 - and remove the 230 V socket - arrow 2 -.






Installing

Install in reverse order of removal. Note the following:

- Insert the trim at the top, tilt it down and clip it in.

- Press the center console rear trim onto the center console until it engages audibly.

Tightening specifications, refer to => [ Center Console Overview ] Center Console Overview.