Spare Wheel Well Trim

Spare Wheel Well Trim

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

Removing






- Remove the rear luggage compartment floor.

- Remove the spare wheel.

- Remove the vehicle tool kit mount - 2 -.

- If equipped, remove the subwoofer - 3 -.

- If equipped, remove the nuts - 5 - and - 6 - and remove the trailer hitch mount - 4 -.

- Remove the spare wheel well trim - 1 - on the side and on the front under the luggage compartment floor panel.

Installing

Install in reverse order of removal. Note the following:

- Install the spare wheel well trim - 1 -.

- Lift the luggage compartment floor panel on the side and in the front using (3409) and insert the trim panel.

Tightening specifications, refer to => [ Tightening specification, trailer hitch to body ] Storage Area Floor With Gap Cover.