Access/Start Authorization Antenna In Luggage Compartment (R137)

Access/Start Authorization Antenna in Luggage Compartment (R137)

Removing






- Fold up the luggage compartment floor.

- Depending on the equipment, the vehicle tool kit mount may have to be removed.

- Avant: Remove the spare wheel well trim.

- Remove the nuts - arrows -.

- Remove the access/start authorization antenna in luggage compartment - item 1 -.

- Disconnect the electrical connector - 2 -.

Installing

• Tightening specification, refer to => [ Access/Start Authorization Antenna in Luggage Compartment Bolt Tightening Specification ] Keyless Access System Overview.

Install in reverse order of removal. Note the following:

- Avant: Install the spare wheel well trim.