Seal Between Transmission and Bevel Box

Seal between Transmission and Bevel Box

Special tools, testers and auxiliary items required

• Pulling Hook (T20143)

• Thrust Piece (T10298)

• Grease, refer to the Parts Catalog

Procedure

- Bevel box, removing. Refer to => [ Bevel Box ] Service and Repair

- Pry out sealing ring on bevel box with pulling hook (T20143/1) or pulling hook (T20143/2).






- Lightly oil outer circumference of new shaft seal.

- Fill the space between the sealing and dust lip - arrow - half way with sealing grease; sealing grease, refer to the Parts Catalog.






- Install the shaft seal all the way in using the (T10298).