Fuel Rail

Fuel Rail

• Intake manifold must be removed, Intake manifold, removing, refer to => [ Intake Manifold with Fuel Rail ] Intake Manifold With Fuel Rail.

- Open hose clamp - 1 -.

- Remove hoses from Evaporative Emission (EVAP) canister.

- Open the fuel line on the fuel rail.

- Loosen both bolts - arrows - from the fuel rail.






- Remove the fuel rail from the intake manifold.

Installing

- Always replace both fuel supply line connections.

- Tighten the fuel line.

- Further installation is performed in reverse order.

- Connect the electrical connector.

- Install intake manifold. Refer to => [ Intake Manifold with Fuel Rail ] Intake Manifold With Fuel Rail.