Air Injection Control Valve: Service and Repair

Secondary Air Injection Solenoid Valve (N112)

Removing

- Remove the air filter.


Danger of causing damage to other electronic components when disconnecting the battery.

• Complete the steps for disconnecting the battery.

- Remove the battery.

- Remove the battery tray - arrows -.






- Disconnect the connector - A - and hose - B - from the Secondary Air Injection (AIR) solenoid valve (N112).






- Loosen the coolant pipe; remove the bolts - arrows -.






- Remove the bolts - arrows - and remove the AIR solenoid valve.






Installing:

• Tightening specifications, refer to => [ Cylinder Head Overview ] Cylinder Head Overview.

Install in reverse order of removal. Note the following:

• Replace gaskets and self-locking nuts.

- Install the battery.

- Install the air filter.