Fan Shroud: Service and Repair

Fan Shroud

Removing






- Remove the cover for the air guide; to do this, disengage the side clips - arrows -.

- Unclip the lower air guide, to do this, disengage the clips - arrows -.






- Remove both the lower air guide and the air guide hose.

- Remove the bolts - 1 - from the top.






• Ignore - 2 and 3 -.

- Loosen the hose clamp - 2 -.






- Remove the bolt - 4 -.

- Disconnect the connector - arrow - and free up the wire.

• Ignore - 1 and 3 -.

- Remove the noise insulation in the center by loosening the fasteners - 1 and 2 -.






- Remove the air guide hose - 1 and 2 -.






- Remove the bolt - 1 - and remove the air guide pipe downward.






• Ignore - 2, 3 and 4 and the arrow -.

- Disconnect the connector - 2 -.






- Remove the bolts - 3 - and remove the fan shroud downward.

Installing

• Tightening specification, refer to => [ Radiator and Coolant Fan Overview ] Radiator and Coolant Fan Overview.

Install in reverse order of removal. Note the following:

- Air guides, installing with connector. Refer to => [ Hose Connections with Connector Couplings, Assembling ] Service and Repair