Rear Window Wiper Arm

Rear Window Wiper Arm

Removing






- Switch on ignition.

- Activate the rear window wiper and allow the wiper arm to move to end position.

- Switch off ignition and remove ignition key.

- Carefully expand cap - arrows - and remove.

- Carefully remove nozzle - 2 - from connecting pipe.






- Loosen hex head nut - 1 - a few turns.

- Loosen wiper arm by tilting slightly from the wiper arm axle, remove the hex nut and then remove the wiper arm.

Installing

Install in reverse order of removal, observing the following:

- Adjust wiper arm. Refer to => [ Rear Window Wiper Arm, Adjusting ] Rear Window Wiper Arm, Adjusting.

Tightening Specifications