Cover Circuit Board With Selector Lever Scale Illumination Bulb (L101), For Vehicles With Stationary Shift Mechanism Cover

Cover Circuit Board with Selector Lever Scale Illumination Bulb (L101), for Vehicles with Stationary Shift Mechanism Cover

Removing

- Remove the shift mechanism cover. Refer to => [ Selector Lever Boot, Separating from Selector Lever Handle, Vehicles with Selector Lever Boots ] Selector Lever Boot, Separating From Selector Lever Handle, Vehicles With Selector Lever Boots

- Push the hooks - arrows - toward the inside and remove the cover - 2 - from the guide - 1 -.





- Remove the circuit board from the covering.

Installation

Install in reverse order, paying attention to the following:

• When building the cover, make sure that the tabs do not break the contact.

- Install the shift mechanism cover. Refer to => [ Selector Lever Boot, Separating from Selector Lever Handle, Vehicles with Selector Lever Boots ] Selector Lever Boot, Separating From Selector Lever Handle, Vehicles With Selector Lever Boots