Right Flange Shaft Seal

Right Flange Shaft Seal

Special tools, testers and auxiliary items required

• Pulling Hooks (T20143/2)

• Pressure Piece (3377)

• Grease, refer to the electronic parts catalog ETKA

Procedure

- Remove the right flange shaft. Refer to => [ Right Flange Shaft ] Right Flange Shaft

- Pull out flange shaft seal using (T20143/2).

- Lightly oil outer circumference of new shaft seal.

- Fill the space between the sealing and dust lip - arrow - half way with sealing grease; sealing grease, refer to the electronic parts catalog ETKA.





- Drive in new seal to stop with (3377), do not distort the seal while doing this.





- Install the right flange shaft. Refer to => [ Right Flange Shaft ] Right Flange Shaft