Cylinder Head, Valvetrain - Fastener Tightening Specifications

Fastener Tightening Specifications






Lower Toothed Belt Guard and in the Center - Tightening Specification





- Tighten bolts - arrows - to 9 Nm.

Cylinder Head Cover, Tightening Specifications and Sequence





- Tighten the cylinder head cover bolts to 9 Nm in sequence - 1 to 7 -.

Cylinder Head, Tightening Specifications and Sequence










Guide Frame Tightening Specifications and Sequence





- Tighten guide frame bolts and nut in 2 stages in - 1 to 24 - sequence as follows:

- Insert bolts evenly by hand all the way.

• The guide frame must be in contact with the entire contact surface of the cylinder head.

- Tighten to 10 Nm.