Oil Pressure Switch

Oil Pressure Switch

Special tools, testers and auxiliary items required

• Assembly Tool (T10118)

Removing

- Remove the engine cover - arrows -.





- Remove the air filter housing.





- Disconnect electrical connector - 1 - on oil pressure switch (F1) with (T10118).





- Remove oil pressure switch - 2 -.

• Ignore - 3 -.

Installing

• Tightening specifications, refer to => [ Oil Filter Bracket and Oil Cooler Assembly Overview ] Service and Repair.

Installation is in reverse order of removal, note the following:

• Replace sealing ring.

- Install air filter housing.