Outside Floor Assembly Anchorage Point

Outside Floor Assembly Anchorage Point

Removing





- Remove lower A-pillar trim. Refer to => [ Lower A-Pillar Trim ] Lower A-Pillar Trim.

- Remove the rear bench seat. Refer to => [ Rear Bench Seat ] Rear Bench Seat.

- Remove sill panel trim. Refer to => [ Sill Panel Strip ] Sill Panel Strip.

- Remove lower B-pillar trim. Refer to => [ Lower B-pillar Trim ] Lower B-pillar Trim.

- Remove bolt - 1 - on three-point seat belt lower anchorage point - 2 -.

Installation

Installation is reverse of removal, but note the following:

• If seat belt is being removed for accident repairs, replace screw.

Tightening Specifications